Welcome to our Online Catalogue for Reference Materials
-
Both categories, procedures and products, contain the complete offer
-
To search please use the navigation bar on the left side of the page
-
After submitting the form you will receive a non-binding offer
-
Discount levels for reference materials
-
Your personal contact
[a]: These proficiency assessments are within the scope of the accreditation according to ISO/IEC 17043:2010. The Kunststoff-Institut Lüdenscheid is not accredited for the production of reference materials according to EN ISO 17034:2016.
Categorisation according to procedures
1 - Manufacturing quality
unspecified
New
1006 | Without reference to standard | Benchmarking additive manufacturing
320 EURSchedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
2 - Basic physical quantities
01 - Thermoplastics
2101 | ISO 1183-1:2012-05 | Density [a]
- Density, ρ
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
2102 | ASTM D792:2013 | Density
- Density , ρ
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
2103 | Without reference to standard | Glasfiber length distribution
- Glass fibre length distribution
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
08 - Nonwovens and fabrics
2807 | ISO 3801:1977-09; DIN EN 12127:1997-12 | Area-related mass of polyester and viscose material
- Area-related mass of polyester and viscose material
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
2806 | ASTM D7466:2010 | Unevenness (Asperity Height)
- Unevenness (Asperity Height)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
2805 | ASTM D5994:2010 | Core thickness
- Determination of core thickness
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
2804 | ASTM D5199:2012 | Determination of nominal thickness
- Determination of nominal thickness
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
2803 | ISO 9863-1:2016-07 | Thickness under specified pressures
- Thickness under specified pressures
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
2802 | ISO 9073-2:1995-03 | Thickness measurement of nonwovens 20 kPa
- Thickness measurement of nonwovens 20 kPa
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
2801 | ISO 5077:2007-02; ISO 6330:2012-04 | Dimensional change after washing
- Dimensional change after washing
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
07 - Pipes
2701 | Without reference to standard | Wall thickness measurement on tubes
- Wall thickness measurement on tubes
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
02 - Elastomers / TPE
2201 | ISO 2781:2018-06 | Density (elastomers)
- Density (elastomers), ρ
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
03 - Adhesives, coatings and surfaces
2301 | ISO 2177:2003-03 | Measurement of coating thickness – Coulometric method
370 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
New
2302 | Without reference to standard | Measurement of coating thickness – X-ray fluorescence analysis (RFA)
320 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
2303 | ISO 1463:2003-03 | Measurement of coating thickness – Optical cross-section
370 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
unspecified
2001 | Without reference to standard | Measurement by means of optical microscope
340 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3 - Mechanical methods
04 - Composite materials and thermosets
New
3408 | ISO 13003:2003-12; ASTM D3479/D3479M-12 | Composites – Determination of fatigue properties under cyclic loading conditions
Tension – tension loading
1245 EURSchedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
New
3407 | ASTM D 7078/D 7078M:2012 | Composites – shear properties V Notched Rail Shear Method
825 EURSchedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
New
3406 | ISO 527-4:1997 | Composites – tensile properties (Isotropic and anisotropic)
ISO 527-4:1997 | Composites – tensile properties (Isotropic and anisotropic)
825 EURSchedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
New
3405 | EN ISO 14130:1997 | Composites – apparent interlaminar shear strength (ILSS)
825 EURSchedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3404 | ISO 14126:1999-09 | Composites – compressive properties
Method 2: common fixtures (CLC, etc.)
- Compressive modulus
- Compressive strength
- Compression at breakage
Schedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3403 | ISO 14125:1998-03 | Composites – flexural properties
- Flexural modulus Ef
- Maximum bending strength σfM
- Flexural strain at flexural strength εfM/li>
Schedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3402 | ISO 14129:1997-12 | Composites – shear properties determined in tensile test (±45° laminates)
- Shear Modulus, G12
- Shear strength, τ12M
Schedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Reference samples
775 EUR
3401 | ISO 527-5:2009-07 | Composites – tensile properties (unidirectional laminates)
- Tensile modulus of elasticity, εt
- Tensile strength, σm
- Elongation at Tensile strength, εm
Schedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Reference samples
775 EUR
01 - Thermoplastics
3108 | ISO 178:2010-12 | Flexural properties [a]
Test range ≤ 5 kN
- Flexural modulus, εf
- Flexural strength, σfM
- Flexural strain at flexural strength, εfM
- Stress at 3.5 % elongation, σ3,5
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
315 EUR
3107 | ASTM D638:2014 | Tensile properties
Test range ≤ 5 kN
- Tensile modulus of elasticity, εt
- Tensile strength, σm
- Elongation at Tensile strength, εm
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3106 | ISO 527-2:2012-02 | Tensile properties of polyamides “Dry as molded (DAM)” [a]
Test range ≤ 10 kN; dry as moulded
- Tensile modulus of elasticity, εt
- Tensile strength, σm
- Elongation at Tensile strength, εm
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3105 | ISO 527-2:2012-02 | Tensile properties at low temperature
Test range ≤ 10 kN; climatic chamber (-30 ±2)°C
- Tensile modulus of elasticity, εt
- Tensile strength, σm
- Elongation at Tensile strength, εm
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
315 EUR
3104 | ISO 527-2:2012-02 | Tensile properties at high temperature
Test range ≤ 5 kN; climatic chamber (80 ±2)°C
- Tensile modulus of elasticity, εt
- Tensile strength, σm
- Elongation at Tensile strength, εm
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3103 | ISO 527-2:2012-02 | Tensile properties [a]
Test range ≤ 5 kN
- Tensile modulus of elasticity, εt
- Tensile strength, σm
- Elongation at Tensile strength, εm
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
315 EUR
3102 | ISO 2039-1:2001-12 | Ball indentation hardness
- Ball indentation hardness , HB
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
3101 | ISO 868:2003-03 | Indentation hardness; Shore-D hardness [a]
- Shore D Hardness, HD
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
3121 | ISO 899-1:2017-09 | Creep rupture tensile test
370 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
315 EUR
3120 | ISO 6721-5:1996-05 | Dynamic mechanical properties (DMA)
- Storage modulus, E‘ @ +30°C
- Storage modulus, E‘ @ 75°C
- Loss factor, tan δ @ +30°C
- Loss factor, tan δ @ +75°C
- Glass transition temperature (E‘-Onset)
- Glass transition temperature (E‘‘-Peak)
- Glass transition temperature (tan δ-Peak)”
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
415 EUR
3119 | ISO 180:2000-12 | Izod impact strength; unnotched and notched test specimens (aIU | aIN)
- Izod impact strength (180/A), aIN
- Izod impact strength (180/U), aIU
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
3118 | DIN 53435:2018-09 | Dynstat impact strength; unnotched and notched test specimens
Pendulum e. g. 1-11 J
- Dynstat impact strength (notched), adA
- Dynstat impact strength (unnotched), adU
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3117 | ISO 179-1:2010-06 | Charpy impact strength Polyamide; dry as moulded unnotched and notched test specimens (acU | acN) “Dry as molded (DAM)” [a]
Possible pendulums e. g. 0,5-5 J
- Charpy impact strength (1eA), acN
- Charpy impact strength (1eU), acU
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3116 | ISO 179-1:2010-06 | Charpy impact strength at sub-zero temperatures; unnotched and notched test specimens (acU | acN)
pendulum e. g. 0,5-5 J; climatic chamber (-30 ±2)°C
- Charpy impact strength (1eA), acN
- Charpy impact strength (1eU), acU
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3115 | ISO 179-1:2010-06 | Charpy impact strength; notched specimens (1eU – acN) [a]
Possible pendulums: e. g. (0,5-5) J
- Charpy impact strength (1eA), acN
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
3114 | ISO 179-1:2010-06 | Charpy impact strength; unnotched specimens (1eU – acU) [a]
Possible pendulums: e. g. (0,5-5) J
- Charpy impact strength (1eU), acU
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
3113 | ISO 6603-2:2000-10 | Puncture impact behaviour of rigid plastics (instrumented impact testing)
Recommendation: Total mass of impact body = 20 kg
- Maximum force
- Deformation at maximum force
- Energy until maximum power
- Puncture forming
- Puncture energy
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
365 EUR
3112 | ISO 604: 2002-03 | Compressive properties
Test range ≤ 5 kN
- Compressive yield stress, σy
- Nominal compression, εcy
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
315 EUR
3111 | DIN 53435:2018-09 | Dynstat; bending stress at 3.5% elongation
- Dynstat; bending stress at 3.5% elongation
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3110 | ASTM D790:2017 | Flexural properties
Test range ≤ 5 kN
Flexural modulus, εf ● Flexural strength, σfM ● Flexural strain at flexural strength, εfM ● Stress at 3.5 % elongation, σ3,5
370 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3122 | ISO 6603-1:2000 | Puncture impact behaviour of rigid plastics (non-instrumented impact testing)
- Impact behaviour of solid plastics
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
New
3123 | Determination of the Poisson’s ratio
- Poisson’s ratio / transverse contraction number
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3109 | ISO 178:2010-12 | Flexural properties of polyamides Test range ≤ 5 kN; dry as moulded
470 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
02 - Elastomers / TPE
3207 | ASTM D412:2016 | Tensile properties (sample S3A)
Test range ≤ 1 kN
- Tensile strength
- Stress at 200 % elongation
- Elongation at break
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3206 | ISO 37:2017-11 | Tensile properties (sample S3A)
Test range ≤ 1 kN
- Tensile strength
- Stress at 200 % elongation
- Elongation at break
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3205 | ISO 37:2017-11 | Tensile properties (sample S2) [a]
Test range ≤ 1 kN
- Tensile strength
- Stress at 200 % elongation
- Elongation at break
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
365 EUR
3204 | ISO 48-1:2018-08 | IRHD hardness (Method N)
- IRHD Hardness (Method N)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
3203 | DIN ISO 48:2016-09 | IRHD hardness (Method M)
- IRHD Hardness (Method M)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
3202 | ASTM D2240:2015 | Indentation hardness; Shore-A hardness
- Shore A Hardness, HA
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
3201 | ISO 868:2003-03 | Indentation hardness; Shore-A hardness [a]
- Shore A Hardness, HA
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
3213 | ISO 2285:2013-01 | Tensile set
- Tensile set
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3212 | ISO 815-2:2014-11 | Compression set (low temperature)
- Compression set (low temperature)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3211 | ISO 815-1:2014-09 | Compression set
- Compression set after 22 h at 100 °C
- Compression set after 72 h at 23 °C
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
265 EUR
3210 | ISO 34-1:2015-06 | Tear resistance – angle specimen – unnotched
- Tear strength
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3209 | ISO 34-1:2015-06 | Tear resistance – angle specimen with notch
Test range ≤ 1 kN
- Tear strength
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3208 | ISO 34-1:2015-06 | Tear resistance – strip test
Test range ≤ 1 kN
- Tear strength
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
265 EUR
3214 | ISO 4662, DIN 53512 | Rebound Elasticity
320 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
07 - Pipes
3702 | ISO 17454:2006-02 | Adhesion
Multilayer composite pipes
- Adhesion
- Multilayer composite pipes
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3701 | ISO 9969:2016-01 | Ring stiffness
- Ring stiffness
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3703 | ISO 1167-1/-2:2006-02 | Resistance to internal overpressure
- Resistance to internal overpressure
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
06 - Foils
3605 | DIN 55529:2012-09 | Sealing seam strength
- Sealing seam strength; maximum force
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3604 | ISO 6383-2:1983-09 | Tear resistance – Elmendorf method
- Elmendorf process; tear resistance
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3603 | ISO 6383-1:2015-12 | Tearing process; tear resistance
Test range ≤ 1 kN
- Tearing process; tear resistance
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3602 | ISO 11339:2010-02 | T peeling test; average peeling force
Test range ≤ 1 kN
- T peeling test; average peeling force
Schedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3601 | ISO 527-3:2018-11 | Tensile properties (foils)
Test range ≤ 1 kN
- Yield stress
- Strain at yield stress
- Stress at X % elongation (usually 3.5%)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
05 - Foams
3503 | ISO 1856:2018-06 | Compression set
- Compression set
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3502 | ISO 1798:2008-02 | Tensile properties (foams)
Test range ≤ 1 kN
- Tensile strength
- Elongation at break
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3501 | ISO 3386-1:1986-06; DBL 5452 | Compression hardness at 40 % deformation
Test range ≤ 5 kN
- Compression hardness
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
08 - Nonwovens and fabrics
3813 | ISO 811:2018-03 | Determination of resistance of textile fabrics to water penetration; hydrostatic pressure test
- Determination of resistance of textile fabrics to water penetration; hydrostatic pressure test
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3812 | ISO 13938-2:1999-08 | Bursting properties of fabrics -bursting strength and bursting distension
- Bursting properties of fabrics -bursting strength and bursting distension
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3811 | ASTM D4833:2007 | Stamp penetration test
- Stamp penetration test
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3810 | ISO 12236:2006-09 | Stamp penetration test (CBR test)
- Stamp penetration test (CBR test)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3809 | ISO 13936-1/-2:2004-04 | Determination of the slippage resistance of yarns at a seam in woven fabrics
- Determination of the slippage resistance of yarns at a seam in woven fabrics
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3808 | ISO 13937-3:2000-04 | Determination of tear force of wing shaped test specimens
- Determination of tear force of wing shaped test specimens
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3807 | ISO 13937-2:2000:04 | Determination of tear force of trouser-shaped test specimens (single tear method)
- Determination of tear force of trouser-shaped test specimens (single tear method)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3806 | ISO 13937-1:2000-04 | Determination of tear force using ballistic pendulum method (Elmendorf)
- Determination of tear force using ballistic pendulum method (Elmendorf)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3805 | ISO 13934-2:2014-01 | Grab pull test
- Grab pull test
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3804 | ISO 13934-1:2013-04 | Strip tensile test
- maximum force [N] – chain
- Highest tensile elongation [%] – Chain
- maximum force [N] – shot
- maximum tensile elongation [%] – shot
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3803 | ASTM D1004:2013 | Tear resistance
Test range ≤ 1 kN
- Tear resistance
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3802 | ASTM D6693:2004 | Tensile properties (PE/PP Geomembranes)
Test range ≤ 1 kN
- Yield stress
- Strain at yield stress
- Breaking stress
- Elongation at break
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3801 | ISO 527-3:1995-08 | Tensile properties (nonwovens / fabrics)
Test range ≤ 1 kN
- Yield stress
- Strain at yield stress
- Breaking stress
- Elongation at break
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
unspecified
3001 | LV 112-1:2014-04 | Single-core copper cable: abrasion resistance of the insulation
- 9.3.2 – Abrasion resistance of the isolation
For 9.4 Flame resistance the test 7003 – ISO 6722:2010-11 can be booked separately
For 9.6.10 Impact test (- 15°C) the test 3002 – VW 60306-1:2018-0 can be booked separately
Schedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3002 | VW 60306-1:2018-09 | Single-core copper cables: impact test at low temperature (- 15°C)
- 9.6.10 – Impact strength at low temperature (-15°C)
Corresponds to 9.6.10 of LV 112-1:2014-04
370 EURSchedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3004 | LV 112-1:2014-04 | Single-core copper cable: Notch strength of insulation
- 9.3.5 – Notch resistance of isolation
For 9.4 Flame resistance the test 7003 – ISO 6722:2010-11 can be booked separately
For 9.6.10 Impact test (- 15°C) the test 3002 – VW 60306-1:2018-0 can be booked separately
Schedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
03 - Adhesives, coatings and surfaces
3301 | ISO 4578:1997-07 | Roll peeling process for high-strength adhesive bonds
- Peel resistance for high-strength adhesive bonds
Schedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
3302 | ISO 4587:2003-03 | Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
- Tensile lap-shear strength of rigid-to-rigid bonded assemblies
Schedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
4 - Thermal analysis
01 - Thermoplastics
4106 | ASTM D3418:2015 | DSC analysis; melting temperature / enthalpy
- Melting temperature
- Melting enthalpy
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
4105 | ASTM D3418:2015 | DSC analysis; glass transition temperature
- Extrapolated onset temperature
- Center temperature
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
4104 | ISO 11357-7:2015-08 | DSC analysis; crystallisation kinetics
- DSC analysis; crystallisation kinetics
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
4103 | ISO 11357-6:2018-03 | DSC analysis; oxidation induction time
- DSC analysis; Oxidation induction time
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
4102 | ISO 11357-2:2013-05 | DSC analysis; glass transition temperature 1 [a]
- Onset temperature
- Center temperature
- Point of inflection
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
4101 | ISO 11357-3:2018-03 | DSC analysis; melting temperature / enthalpy [a]
- Melting temperature
- Melting enthalpy
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
4114 | ISO 22007-2:2015-08 | Thermal conductivity – Hot Disc method
- Thermal conductivity – Hot Disc method
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
4113 | ISO 22007-4:2017-06 | Thermal conductivity – laser flash method
- Thermal conductivity – laser flash method
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
4112 | ISO 11359-1/-2:2014-01/1999-10 | Thermomechanical Analysis (TMA)
- Mean linear coefficient of thermal expansion a (Method A)
- Glass transition temperature
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
270 EUR
4111 | ASTM D648:2018 | Heat deflection temperature (HDT)
- Heat deflection temperature
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
4110 | ISO 75-1:2013-04 | Heat deflection temperature (HDT) [a]
- Heat deflection temperature
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
4109 | ASTM D1525:2017 | Vicat softening temperature
- Vicat softening temperature
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
4108 | ISO 306:2013-11 | Vicat softening temperature [a]
- Vicat softening temperature
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
4107 | ASTM D3895:2014 | DSC analysis; oxidation induction time
- DSC analysis; oxidation induction time /li>
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
08 - Nonwovens and fabrics
4801 | ISO 11357-3:2018-03 | DSC analysis; melting temperature, enthalpy (textiles) [a]
- Melting temperature
- Enthalpy of melting
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
02 - Elastomers / TPE
4201 | ISO 11357-2:2013-05 | DSC analysis – glass transition temperature (elastomers) [a]
- Onset temperature
- Center temperature
- Point of inflection
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
265 EUR
5 - Surface properties
06 - Foils
5601 | ISO 14782:1999-08 | Transparency/Haze; Haze value
- Transparency/Haze; Haze value
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
5602 | ISO 8295:1995-10 | Coefficient of friction
- Static coefficient of friction
- Dynamic coefficient of friction
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
03 - Adhesives, coatings and surfaces
5307 | ISO 1518-1:2011-06 | Scratch resistance
- Scratch resistance
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
5306 | PV 3952:2015-11 | Scratch resistance [a]
- Scratch resistance
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
5305 | ISO 2409:2013-02 | Cross cut test
- Cross-cut value
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
5304 | PV 3987:2016-11 | Abrasion resistance of high gloss surfaces [a]
- Abrasion resistance of high gloss surfaces
Attention!!!! Starts end of January 2022!!!
320 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
265 EUR
5303 | ISO 2813:2014-10 | Gloss level; gloss value (60°) [a]
- Gloss level; gloss value (60°)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
5302 | DIN 53236B:2018-02 | Color measurement (45°/0) – (ΔE*) ΔL* Δa* Δb* [a]
- ΔL*
- Δa*
- Δb*
- ΔE*
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
5301 | DIN 53236A:2018-02 / ISO 7724:1984 | Color measurement (8°/d); (ΔE*) ΔL* Δa* Δb* [a]
- ΔL*
- Δa*
- Δb*
- ΔE*
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
5309 | GS 97034-1:2015-09 | Abrasion test, e.g. ABREX / TRIBOTOUCH
- Contrast sign of wear-unloaded Surface
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
5308 | PV 3974:2020-06 | Determination of the Mar Resistance
- Plastic interior components – Determination of the writing sensitivity of injection-molded grained surfaces in the vehicle interior
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
5310 | VW 50195:2002-11 | Colorimetric evaluation of effect varnishes
320 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
5311 | Without reference to standard | Surface analysis using atomic force microscope (AFM)
470 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
New
5312 | PV 3964:2008-02 | Cream Resistance
- Visual evaluation
- Hardness test rod, 0.75 mm test probe (Bosch)
- Cross-cut test
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
5313 | ISO 105-A02 | Difference in colour by gray scale
280 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
02 - Elastomers / TPE
5201 | ISO 4649:2017-09 | Abrasion resistance (rotating cylinder drum)
- Abrasion resistance (rotating cylinder drum)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
unspecified
5001 | DIN 55660-2:2011-12 | Surface energy – Measurement of the contact angle
- Contact angle Θ: Water
- Contact angle Θ: Diiodomethane
- Surface energy, polar
- Surface energy, dispersive
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
08 - Nonwovens and fabrics
5808 | ISO 15797:2017-12 | Industrial washing with subsequent color measurement
- Industrial washing with subsequent color measurement
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
5807 | ISO 9237:1995-06 | Air permeability (method 2: peracetic acid bleach)
- Air permeability (method 2: peracetic acid bleach)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
5806 | ISO 9073-12:2002-11 | Absorbability of textiles
- Absorbability of textiles
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
5805 | ISO 12945-2:2000-07 | Pill inclination Martindale
- Pill inclination Martindale
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
5804 | ISO 12945-1:2000-12 | Pill inclination (pilling test box)
- Pill inclination (pilling test box)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
5802 | Ganz method | white degree measurement
- white degree measurement
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
5801 | Without reference to standard | Colour measurement (8°/d); (ΔE*) ΔL* Δa* Δb* (Textiles)
280 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
5803 | ISO 12947-2:2016-12 | Abrasion resistance Martindale
- Abrasion resistance Martindale
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
6 - Rheology / Viscometry
02 - Elastomers / TPE
6201 | ISO 289-1:2015-09 | Mooney viscosity
- Mooney viscosity
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
01 - Thermoplastics
6108 | ISO 6721-10:2015-09 | Complex shear viscosity
Parallel plate oscillation rheometer
- Storage modulus G‘ (w = 1 s-1)
- Loss modulus G‘‘ (w = 10 s-1)
- Viscosity |h*| (Abs. value) (w = 100 s-1)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
315 EUR
6107 | ISO 11443:2014-04 | Flowability capillary rheometer
Kapillarrheometer
- Apparent viscosity at a shear rate of 11 1/s
- Apparent viscosity at a shear rate of 1000 1/s
- Apparent viscosity at a shear rate of 5900 1/s
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
6106 | ISO 1628-5:1998-03 | Solution viscosity (phenol/1,2-dichlorobenzene)
- Viscosity number
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
315 EUR
6105 | ISO 307:2007-05 | Solution viscosity (formic acid)
- Viscosity number
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
6104 | ISO 307:2007-05 | Solution viscosity (m-cresol)
- Viscosity number (m-cresol)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
6103 | ISO 307:2007-05 | Solution viscosity (conc. sulfuric acid)
- Viscosity number
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
6102 | ASTM D1238:2013 | Melt mass flow rate (MFR) – volume flow rate (MVR)
- Melt mass-flow rate (MFR)
- Melt volume rate (MVR)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
6101 | ISO 1133-1:2011-12 | Melt mass flow rate (MFR) – volume flow rate (MVR) [a]
- Melt mass-flow rate (MFR)
- Melt volume rate (MVR)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
7 - Environmental simulation
01 - Thermoplastics
7111 | ASTM D 6400:2012 | Label – Aerobically Composted in Municipal or Industrial Facilities
370 EURSchedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
New
7110 | EN 14995:2006 | Characterisation of compostability
370 EURSchedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7102 | DIN 75220:1992-11 | Ageing in solar simulation systems (D-IN1-T)
- Colour change by means of grey scale (ISO 105-A02)
Schedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Reference samples
365 EUR
7101 | ISO 105-B06:1998-11; VDA 75202 | Light fastness – colour fastness and ageing against artificial light at high temperatures (Xenon arc lamp)
- Light fastness – colour fastness and ageing against artificial light at high temperatures (Xenon arc lamp)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7109 | DIN EN 60695-2-13:2015-01 | Fire hazard – glow wire test (GWIT)
- Glow Wire Ignition Temperature
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7108 | UL 94 (VB):2013-03-28 | Burning behaviour UL 94 (VB)
- Afterburning time after the 1st flame treatment (t1)
- Burning behaviour (t2)
- Afterburning time plus Afterglow time after the 2nd flame treatment (t2+t3)
- Burn down to the clamp?
- Ignition of the cotton?
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7106 | DIN 75200:1980-09; FMVSS 302:2017-10 | Flammability and burning behaviour (thermoplastics) [a]
- Burning rate
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
265 EUR
7105 | ASTM G155:2013 | Exposure of non-metallic materials (Xenon arc lamp)
- Exposure of non-metallic materials (Xenon arc lamp)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7104 | ISO 4892-2:2013-03 | Lightfastness – Irradiation or weathering in devices (Xenon arc lamp)
1-Cycle
- Colour change by means of grey scale (ISO 105-A02)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
365 EUR
7103 | DIN 75220:1992-11 | Ageing in sun simulation systems (Z-OUT)
1 cycle
- Ageing in sun simulation systems (Z-OUT) 1 cycle
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
New
7112 | PV 1306:2008-02 | Exposure Test for Determining the Tackiness of Polypropylene Parts
- Tackiness of PP-Parts after exposure
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7107 | UL 94 (HB):2013-03-28 | Burning behaviour UL 94 (HB)
- Burning rate
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
08 - Nonwovens and fabrics
7806 | ASTM D5397:2007 | Stress crack resistance
- stress crack resistance
420 EUR
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7805 | DIN EN 14576:2005-07 | Environmental stress cracking
- Environmental stress cracking
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7804 | DBL 5307; FMVSS 302 | Flammability and burning behaviour (leather)
- Burning behaviour (leather)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7803 | FMVSS 302 | Flammability and burning behaviour (textiles) [a]
- Flammability (textiles)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7802 | ISO 105-B04:1994-11 | Light fastness (Xenon arc lamp)
- Light fastness (Xenon arc lamp)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7801 | ISO 105-B02:2014-09 | Light fastness (Xenon arc lamp)
- Light fastness (Xenon arc lamp)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7812 | ISO 105-X12:2016-06 | Colour fastness to rubbing (Crockmeter)
- Colour fastness to rubbing (Crockmeter)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7811 | ISO 105-E04:2013-03 | Fastness to perspiration
- Fastness to perspiration
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7810 | ISO 105-E01:2013-03 | Fastness to water
- Fastness to water
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7809 | ISO 105-D01:2010-05 | Fastness to dry cleaning
- Fastness to dry cleaning
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7808 | ISO 105-C08:2010-03 | Fastness to washing
- Fastness to washing
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7807 | ISO 105-C06/C2S:2010-03 | Fastness to washing at 60 °C
- Fastness to washing at 60 °C
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
06 - Foils
7602 | ISO 15105-2:2003-02 | Oxygen permeability
- Oxygen permeability
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7601 | ISO 15106-3:2003-01 | Water vapour permeability
Water vapour permeability
420 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7603 | DIN 53380-3:1998-07 | Determination of the gas permeability
- Area-related oxygen permeability
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
05 - Foams
7501 | DBL 5307; FMVSS 302 | Flammability and burning behaviour (foams)
- Combustion behaviour (foams) 1
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
03 - Adhesives, coatings and surfaces
7304 | DBL 7381.30 | Aluminium corrosion (Filiform & CASS)
- Aluminium corrosion (Filiform & CASS)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7303 | DBL 5416; ISO 16925-B:2014-02 | Steam jet test
- Steam jet test
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7302 | ISO 20567-1:2017-01 (Method B) | Multi-impact test (ISO)
Testing according to method B
775 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7301 | ISO 9227:2017-03 | Corrosion test | Salt spray test (NSS)
- Delamination from scribe after 480 h – LENGTHWISE(Evaluation according to DIN EN ISO 4628-8:2013-03)
- Delamination from scribe after 480 h – CROSSWISE(Evaluation according to DIN EN ISO 4628-8:2013-03)
- Corrosion from scribing – LENGTHWISE(Evaluation according to DIN EN ISO 4628-8:2013-03)
- Corrosion from scribing – CROSSWISE(Evaluation according to DIN EN ISO 4628-8:2013-03)
- Evaluation of the degree of blistering in the area of the scribe: Quantity(Evaluation according to DIN EN ISO 4628-2:2013-03)
- Evaluation of the degree of blistering in the area of the scribe: Size(Evaluation according to DIN EN ISO 4628-2:2013-03)
- Weight loss of the steel standards after 48 h of testing
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
505 EUR
7305 | 7305 | ISO 11997-1:2017 | Corrosion test | Determination of resistance to cyclic corrosion conditions
Part 1: Wet (salt fog)/dry/humid
550 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7306 | DBL 5416 | Multi-impact test (DBL)
Testing according to section 12.5 – following ISO 20567-1 (method B)
775 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
unspecified
7001 | LV 122-1:2015-05 | Ageing of twisted wires
- 11.5.1 – Short-term aging
- 114.5.1.1 – Short-term aging in general (240h)
- 11.5.1.2 – Short-term aging for PVC
Schedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7002 | LV 212-1:2015-01 | Sheathed cables for motor vehicles
- 9.3.4 – Bending force of the cable
- 9.6.7 – Long-term ageing (3000h)
- 9.6.8 – Winding test at low temperature (- 40°C)
Schedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7003 | ISO 6722:2010-11 | Flame retardancy of single-core cables
- 5.22 – Flame retardancy
Corresponds to 9.4 of LV 112-1:2014-04
320 EURSchedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8 - Instrumental analytics
02 - Elastomers / TPE
8205 | ISO 4650:2012-12 | FTIR spectroscopy – Identification of rubbers
Material denomination
320 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8204 | ISO 1817:2015-02 | Mass increase (test liquid B)
- Mass increase (test liquid B)li>
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8203 | ISO 1407:2011-12 | Extractable components
- Extractable components
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8202 | AfPS GS 2014:01 PAK | Polycyclic aromatic hydrocarbons (PAHs)
- Polycyclic aromatic hydrocarbons (PAHs)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
8201 | ISO 11358-1:2014-07 | Thermogravimetric analysis (TGA); soot content [a]
- soot content
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
265 EUR
New
8206 | Polybrominated biphenyls (PBB)
according to RoHS (RL 2011/65/EU)
320 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
08 - Nonwovens and fabrics
8807 | ISO 3071:2005-06 | pH-value of textiles
- pH-value of textiles
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8806 | Without reference to standard | Flame retardants in textiles
- Flame retardants in textiles
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8805 | Without reference to standard | Azo dyes in textiles
- Azo dyes in textiles
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8804 | Without reference to standard | Formaldehyde in textiles in accordance with REACH Regulation (EC) No. 1907/2006 Annex XVII.
nach REACH-Verordnung (EG) Nr. 1907/2006 Anhang XVII
- Formaldehyde in textiles
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8803 | ASTM D5596:2003 | Determination of soot dispersion
- Determination of soot dispersion
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8802 | ASTM D4218:2015 | Black carbon content of Geosynthetics
- Black carbon content of Geosynthetics
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8801 | ISO 11358-1:2014-07 | Thermogravimetric analysis (TGA); soot content [a]
- Thermogravimetric analysis (TGA); soot content
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
New
8808 | VDA 270:2018-06 | Emission behaviour: Odour test leather (Variant D4 & D5)
- Odour
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
06 - Foils
8604 | DIN 75201:2011-11 Method A | Emission behaviour: Fogging A
320 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8603 | DIN 75201:2011-11 Method B | Emission behaviour: Fogging B [a]
- Condensable component Gj
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8602 | Without reference to standard | Identification of films (monofoil)
- Identification of films (monofoil)li>
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8601 | Without reference to standard | Identification of films (multilayer)
- Identification of films (multilayer)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
01 - Thermoplastics
8126 | Without reference to standard | Determination of mixture ratios using GPC
470 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8125 | Without reference to standard | Determination of a relative degradation of material by GPC
- Reduction number average
- Reduction in weight average
- Reduction of centrifuge agent
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8124 | Without reference to standard | Determination of mean molecular masses by GPC
Derivatization with trifluoroacetic acid
- Number average, Mn
- Weight average , Mw
- Z average, Mz
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8123 | Without reference to standard | Determination of mean molecular masses by GPC
Solvent HFIP “” Solvent
- Number average, Mn
- Weight average , Mw
- Z average, Mz
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8122 | DIN 55672-1:2016-03 | Determination of mean molecular masses by GPC Solvent THF
- Number average, Mn
- Weight average , Mw
- Z average, Mz
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
415 EUR
8121 | Without reference to standard | Content of lead, cadmium, mercury, chromium VI in Plastics
in accordance with Packaging Ordinance (RL 94/62/EC)
- Content of lead, cadmium, mercury, chromium VI
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8120 | Without reference to standard | Content of Chrome VI
in accordance with Packaging Ordinance (Directive 94/62/EC)
- Content of Chrom VI
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8119 | Without reference to standard | Total content of lead, cadmium, mercury and chromium
- Total content of lead, cadmium, mercury and chromium
280 EUR
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8118 | Without reference to standard | Primary aromatic amines (specific migration)
according to RoHS (RL 2011/65/EU)
- Primary aromatic amines (specific migration)li>
“
280 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8117 | Without reference to standard | Metal release (specific migration)
in accordance with Regulation (EU) No. 10/2011 Annex II
- Metal release (specific migration)li>
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8116 | Without reference to standard | Nonylphenol
in accordance with REACH Regulation (EC) No. 1907/2006 Annex XVII
- Nonylphenol
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8115 | Without reference to standard | Cadmium
According to REACH Regulation (EC) No. 1907/2006 (SVHC List)
- Cadmium
280 EUR
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8114 | Without reference to standard | Phthalate content in plastics
in accordance with REACH Regulation (EC) No. 1907/2006 Annex XVII
- Phthalate content in plastics for children’s articles
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8113 | Without reference to standard | Phthalate content in plastics for children’s articles
in accordance with REACH Regulation (EC) No. 1907/2006 Annex XVII
- Phthalate content in plastics for children’s articles
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8112 | Without reference to standard | Stabilizer content in polyolefins
According to REACH Regulation (EC) No. 1907/2006 (SVHC List)
- Stabilizer content in polyolefins
- According to REACH Regulation (EC) Nr. 1907/2006 (SVHC-Liste)
”
280 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
8111 | VDA 278:2011-10 | Emission behaviour: Thermal desorption analysis
- VOC-value
- VOC-value 2
- Fog-value
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8110 | PV 3341:1995-03; VDA 277:1995-01 | Emission behaviour: emission of organic compounds (total carbon emissions)
- total carbon emission
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8109 | PV 3925; VDA 275 | Emission behaviour: formaldehyde emission
- Formaldehyde release
- moisture
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8108 | VDA 270:2016-11 / PV 3900:2000-08 | Emission behaviour: Odour test [a]
- Odour
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8107 | ISO 62:2008-02 | Water absorption
- Water content at saturation
- Diffusion coefficient
- Mass fraction of the absorbed water
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8106 | ISO 15512:2016-10 | Water content (Karl-Fischer)
Water content
280 EUR
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8105 | ISO 15512:2016-10 | Water content (Aquatrac®); CaH2 method [a]
- Water content (Aquatrac®); CaH2 method
280 EUR
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8104 | Without reference to standard | Quantitative Infrared Spectroscopy (FTIR) [a]
- Vinyl acetate content
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
265 EUR
8103 | ISO 11358-1:2014-07 | Thermogravimetric analysis (TGA); filler content [a]
Thermogravimetric analysis (TGA)
- filler content
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
8102 | ISO 1172:1996-12 | Ash content [a]
- Ash content
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
225 EUR
8101 | Without reference to standard | FTIR spectroscopy – Identification of plastic granules
Material
320 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
265 EUR
8128 | ISO 3451:2019-02 | Plastics – Determination of ash
280 EURSchedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
8129 | Determination of the stabilizer content by GC/MS
in accordance to AfPS GS 2019:01 PAH
470 EURSchedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
9 - Electrical properties
01 - Thermoplastics
9103 | IEC 62631-3-1:2016 | Volume resistance
- Specific volume resistivity
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
315 EUR
9102 | IEC 62631-3-2:2015 | Surface resistance
- Surface resistance
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
9101 | DIN EN 60112:2010-05 | Comparative tracking index (CTI )
- Comparative Tracking Index CTI
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
Categorization according to products
01 - Thermoplastics
7 - Environmental simulation
7111 | ASTM D 6400:2012 | Label – Aerobically Composted in Municipal or Industrial Facilities
370 EURSchedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
New
7110 | EN 14995:2006 | Characterisation of compostability
370 EURSchedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7102 | DIN 75220:1992-11 | Ageing in solar simulation systems (D-IN1-T)
- Colour change by means of grey scale (ISO 105-A02)
Schedule
AutumnRegistration until30.09.2022Sample dispatch up to31.10.2022Result delivery up to31.01.2023
Reference samples
365 EUR
7101 | ISO 105-B06:1998-11; VDA 75202 | Light fastness – colour fastness and ageing against artificial light at high temperatures (Xenon arc lamp)
- Light fastness – colour fastness and ageing against artificial light at high temperatures (Xenon arc lamp)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7109 | DIN EN 60695-2-13:2015-01 | Fire hazard – glow wire test (GWIT)
- Glow Wire Ignition Temperature
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7108 | UL 94 (VB):2013-03-28 | Burning behaviour UL 94 (VB)
- Afterburning time after the 1st flame treatment (t1)
- Burning behaviour (t2)
- Afterburning time plus Afterglow time after the 2nd flame treatment (t2+t3)
- Burn down to the clamp?
- Ignition of the cotton?
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7106 | DIN 75200:1980-09; FMVSS 302:2017-10 | Flammability and burning behaviour (thermoplastics) [a]
- Burning rate
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
265 EUR
7105 | ASTM G155:2013 | Exposure of non-metallic materials (Xenon arc lamp)
- Exposure of non-metallic materials (Xenon arc lamp)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7104 | ISO 4892-2:2013-03 | Lightfastness – Irradiation or weathering in devices (Xenon arc lamp)
1-Cycle
- Colour change by means of grey scale (ISO 105-A02)
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Reference samples
365 EUR
7103 | DIN 75220:1992-11 | Ageing in sun simulation systems (Z-OUT)
1 cycle
- Ageing in sun simulation systems (Z-OUT) 1 cycle
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
New
7112 | PV 1306:2008-02 | Exposure Test for Determining the Tackiness of Polypropylene Parts
- Tackiness of PP-Parts after exposure
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022
Once the next interlaboratory comparison has been carried out, they will be available again. You can reserve your participation via the proficiency testing catalogue.
7107 | UL 94 (HB):2013-03-28 | Burning behaviour UL 94 (HB)
- Burning rate
Schedule
SpringRegistration until31.03.2022Sample dispatch up to30.04.2022Result delivery up to31.07.2022